There are three easy ways to make interior parts such as wing gun boxes, bulkhead framing, cockpit firewalls and consoles, and the interior areas of wheel wells. The method you use depends on the cost of the model and what part you want to make. If you are making interior bulkhead parts or framing for the fuselage you can use a contour gauge to determine the cross-sectional shape of the fuselage at a particular location, draw the part onto sheet plastic, rough-cut the part, and then form-fit the part into place. While the contour gauge will get you fairly close to the interior shape of the fuselage, it is not a precise instrument and you may have to repeat this procedure several times until you get the hang of it.
Download (depositfiles.com)
No comments:
Post a Comment