THE US NAVY has announced that Sikorsky Aircraft has been selected as the winner of the VXX Presidential Helicopter Replacement program. The May 7 news means that, under the terms of a $1.24-billion Engineering and Manufacturing Development (EMD) contract. Sikorsky will build, modify, test and deliver six FAA-certifîed S-92A helicopters and two simulators to the US Marine Corps. The 'competition' had actually become a one-horse race after Northrop Grumman/ AgustaWestland and Bell/Boeing decided not to take part. The EMD contract runs until 2020. Ultimately the program includes 21 operational aircraft that will be delivered by 2023. Sikorsky submitted its VXX proposal for an existing, in-production helicopter platform to the US Navy in August 2013. but became the only bidder for the project when several competitors decided not to pursue it. Sikorsky has delivered more than 200 S-92s, developed as a medium-lift, commercial helicopter, since 2004. Ten nations currently utilize the aircraft for their head of state missions. Also used by the offshore oil and gas industry, and for civil search and rescue, the S-92's main cabin is 20ft (6.1m) long, 6.5ft (1.9m) wide and 6ft (1.8m) high. Two of the six aircraft covered by the EMD contract will be designated as Engineering Development Models (EDM), and will be delivered in 2018. Those aircraft will support flight performance and mission communication system capabilities testing carried out by the US Navy as well as certification testing by the Federal Aviation Administration.
Friday, June 6, 2014
Finescale Modeler 07/2014
In 1943, to counter the growing threat from Royal Air Force night bombing, the Luftwaffe launched a campaign using single-seat fighters. Vectored toward oncoming bombers by controllers, the pilots attacked using illumination from ground-based searchlights and fires. Dubbed "Wilde Sau" (wild boar), the program led to the creation of Jagdgeschwader 300 equipped with Bf 109s and Fw 190s borrowed from day-fighter units. Brian Geiger used Hasegawas 1/32 scale Bf 109G-6 to build a JG 300 aircraft flown by ace Arnold Döring. A layer of Tamiya fine white surface primer provided a foundation for the Testors Model Master, Floquil, and Humbrol enamels Brian used on his Messerschmitt. He used a double-action airbrush powered by a Central Pneumatic compressor. "Its nothing special, but I really appreciate the fact it has a small tank so the motor doesn't run constantly," Brian says. "My stress level goes down a lot without all of the racket." The pre-shaded most panel lines and a few stained areas with thin black paint. "There's no need to be exact while pre-shading,"he says. "Much of the effect will disappear, but enough remains to break up the large areas." On the black areas, he post-shaded panels dark gray.
Airfix Model World 07/2014
First conceived in 1943 as a short-range, fast and heavily-armed interceptor, the Kyushu Shinden (Magnificent Lightning) suffered from development delays that meant just two prototypes were built. Very unusually for the time, the Shinden had a canard pusher configuration, partly because the original idea was to fit a turbojet engine once one became available. Two prototypes were eventually completed by April 1945 but problems with the engineering, equipment and staff shortages had already delayed the programme. The first prototype finally flew in August 1945 and completed approximately 45 minutes of test flights before World War Two ended. Flight data showed that the design was promising but there were issues with torque generated by the radial engine, which pulled the aircraft to the right. These were in the process of being resolved when the war finished. The National Air and Space Museum, in Washington DC, owns the only surviving Shinden. The kit comprised one clear and five light grey runners plus a sheet of decals. Reading the 'Old Man' blog from Telford 2013 on the Zoukei-Mura website provided interesting background for this build, as it explained the idea behind the kits. The concept is that the modeller constructs the internal framework and then adds the outer skin to partially mimic the way the real aircraft would have been built.
Thursday, May 29, 2014
Britain At War 06/2014
TO MARK a period of service spanning more than a century, one of the oldest fixed-wing squadrons in the world recently marked its anniversary with the release of rare archive film footage from 1914. Formed on 13 May 1912, 2 Squadron Royal Flying Corps was trained to carry out reconnaissance, a role its modem day counterparts have continued to fulfil to this day. On the outbreak of war in 1914, the squadron was one of the first to be ordered to France as part of, noted the Official Historian of the RFC, the "first organized national [air] force to fly to a war overseas". By the evening of 12 August 1914, the aircraft of Nos. 2, 3, and 4 squadrons had been concentrated together on the South Coast near Dover. Just before midnight, the final order was received: "All machines to be ready to fly over at 6.0 a.m. the following morning, the 13th of August." The first aircraft of 2 Squadron to take off departed from Dover at 06.25 hours that morning; the first to arrive landed at Amiens at 08.20 hours. This machine, a Royal Aircraft Factory B.E.2c, was flown by Lieutenant Hubert Dunsterville Harvey-Kelly, Royal Irish Regiment, attached RFC (who would subsequently be killed in action). Harvey-Kelly was, in fact, the first British aviator to land in France.
Subscribe to:
Posts (Atom)



